MATEK F405-MiniTE OSD Baro Blackbox F405 Flight Controller


Free Shipping (Est. 10-15 Business Days)

Please note delivery times are currently being impacted by COVID19.
Please allow an additional 10 business days for delivery.
Factors such as delayed logistics and customs clearance may have an impact on the delivery time.



Compared with F722-miniSE, the new features of F405-miniTE

F405 has 1MB flash which can run with ArduPilot fw.  even with INAV firmware, some features will be removed on F722 due to limited flash

The advantage of F722 is all UARTs have builtin inversion which is not needed when CRSF protocol is widely used on new receivers.

Redesigned target MATEKF405TE support 8x bi-directional DSHOT, SPI1, SPI2, ADC without DMA clash.

Support DJI air unit PnP, and a 10V BEC for DJI OSD or analog VTX

Compared with F722-miniSE 8motors or 6motor+2servos, F405-miniTE support 8motors+3servos in INAV/BF multirotor mixer

InvenSense GEN3 IMU ICM42605

 

FC Specifications

MCU: STM32F405RGT6

IMU: ICM42605

OSD: AT7456E

Baro: Goertek SPL06-001 (I2C)

Blackbox: 16M-byte Flash memory

6x UARTs,  1x Softserial_Tx option

12x PWM outputs (8x Dshot)

1x I2C

4x ADC (VBAT, Current, RSSI, Airspeed)

2x PINIO

1x SH1.0_8pin connector (Vbat/G/Curr/R3/S1/S2/S3/S4)

1x SH1.0_6pin connector for DJI FPV Air Unit

3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)

Dual BEC, 5V 1.7A & 10V 1.4A

10V output ON/OFF switchable

Convertible 20mm to 30.5mm mounting

 

Power

Input: 6~30V (2~S LiPo)

BEC: 5V 1.7A,  Max.2A

BEC: 10V 1.4A  for VTX or DJI Air Unit

Battery Voltage Sensor: 1K:20K (INAV scale 2100, BF scale 210)

No Current Sensor built-in, supports external current sensor of PDB/4in1

 

Firmware

ArduPilot: MatekF405-TE

INAV: MATEKF405TE

BetaFlight: MATEKF405TE

 

Physical

Mounting

20 x 20mm/Φ3mm with Silicon Grommets

20 x 20mm/Φ2mm with Silicon & Brass Grommets

30.5 x 30.5mm/Φ3mm with Conversion Plate and Silicon Grommets

Dimensions:  28 x 28 mm

Weight: 5g

 

Including

1x FC F405-miniTE

1x 20mm to 30.5mm conversion plate(blue PCB)

6x Silicon grommets M4 to M3

6x Brass grommets M3 to M2

1x SH1.0_8pin cable 5cm (including 2x 8pin connectors) for 4in1 ESC

1x SH1.0_6pin to GH1.25_8pin cable 8cm for DJI Air Unit

Get 10% off your order