Matek Systems F765-WSE STM32F765VIH6 Flight Controller


Free Shipping (Est. 10-15 Business Days)

Please note delivery times are currently being impacted by COVID19.
Please allow an additional 10 business days for delivery.
Factors such as delayed logistics and customs clearance may have an impact on the delivery time.



FC Specifications

MCU: STM32F765VIH6, 216MHz , 512KB RAM, 2MB Flash

IMU: ICM42688-P (SPI4)

Baro: DPS310 (I2C2)

OSD: AT7456E (SPI2)

Blackbox: MicroSD card slot (SDIO)

6.5x Uarts (1,2,3,Rx5,6,7,8) with built-in inversion.

1x Softserial1_Tx (INAV)

12x PWM outputs (S1~S10 support Dshot)

6x ADC (VBAT, Current, RSSI, Analog AirSpeed, VB2, CU2)

3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)

2x I2C

1x CAN

USB/Beep Extender with Type-C(USB2.0)

Dual Camera Inputs switch

9V(12V) for VTX power switch

High-precision Current Sense, 220A range

ADC VB2 voltage divider: 1K:20K

ADC AirSpeed voltage divider: 20K:20K

Static power 160mA@5V

 

FC Firmware

INAV: MATEKF765SE

ArduPilot: MATEKF765SE

 

PDB

Input voltage range: 6.8~30V (2~6S LiPo)

1x ESC power pads

Battery Voltage divider 1K:20K (Scale 2100 in INAV,  BATT_VOLT_MULT 21.0 in ArduPilot)

Current Senor: 220A,  3.3V ADC  (Scale 150 in INAV,  66.7 A/V in ArduPilot)

Sense resistor: 90A continuous, 220A peak

 

BEC 5V output

Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed

Continuous current: 2 Amps, Max.3A

 

BEC 9V /12V output

Designed for Video Transmitter, Camera, Gimbal ect.

Continuous current: 2 Amps, Max.3A

12V option with Jumper pad

for stable 9V/12V output, input voltage should > output voltage +1V

 

BEC Vx output

Designed for Servos

Voltage adjustable, 5V Default, 6V or 7.2V via jumper

Continuous current: 8 Amps, Max.10A

for stable Vx output, input voltage should > Vx voltage +1V

 

BEC 3.3V output

Designed for Baro / Compass module and external 3.3V peripherals

Linear Regulator

Continuous current: 200mA

 

Physical

Mounting: 25 x 25mm, Φ2mm

Dimensions: 44 x 29 x 14.5 mm

Weight: 22g  w/ USB/buzzer adapter

 

Including

1x F765-WSE

1x USB(Type-C)/Beep (Passive buzzer) Extender

2x 20cm JST-GH-4P to JST-GH-4P cable for CAN & I2C port

1x 20cm JST-SH-6P to JST-SH-6P cable for USB extender.

1x Rubycon ZLH 35V 470uF capacitor

Dupont 2.54 pins  (Board is shipped unsoldered)

Get 10% off your order