- Advanced 32 bit CortexM4 ARM high performance processor, can run RTOS NuttX real time operating system;
- Integrated backup power supply and failure backup controller, the main controller can be safely switched to backup control;
- Provide redundant power input and fault transfer function;
- 14* PWM/ actuator output;
- Bus interface (UART, I2C, SPI, CAN);
- Provide automatic and manual mode;
- Color LED lamp;
- Multi tone buzzer interface;
- Micro SD to record flight data;
Specification:
The board integrates with PX4FMU+PX4IO
Pixhawk is with new 32 bit chip and sensor technology
Processor:
32 bit 2M flash memory STM32F427 Cortex M4, with hardware floating point processing unit
Main frequency: 256K, 168MHZ RAM
32 bit STM32F103 backup co processor
Sensor:
L3GD20 3 axis digital 16 bit gyroscope
LSM303D 3 axis 14 bit accelerometer /magnetometer
MPU6000 6 axis accelerometer / magnetometer
MS5611 high precision barometer
Interface:
5* UART, 1*compatible high voltage, 2*hardware flow control
2*CAN
Spektrum DSM/DSM2/DSM-X satellite receiver compatible input
Futaba SBUS compatible input and output
PPM signal input
RSSI (PWM or voltage) input
I2C
SPI
3.3 and 6.6VADC input
External USB MICRO interface
Fine Collocation included:
1 x 2.4.8 Pixhawk flight controller board with 4G SD with shell
1 x Safety switch and Buzzer
1 x card reader
1 x I2C Line,1 x power module Line,1 x PPM/SBUS Line
Simple Collocation included:
1 x 2.4.8 Pixhawk flight controller board with 4G SD with shell
1 x Safety switch
1 x Buzzer
1 x card reader
1 x I2C Line,1 x power module Line,1 x PPM/SBUS Line
Standard Collocation included:
1 x 2.4.8 Pixhawk flight controller board with 4G SD with shell
1 x Safety switch
1 x Buzzer
1 x card reader
1x PPM encoder
1x I2C splitter expand module
1 x I2C Line,1 x power module Line,1 x PPM/SBUS Line
Package A included:
1 x 2.4.8 Pixhawk flight controller board with 4G SD with shell
1 x Safety switch
1 x Buzzer
1 x card reader
1x PPM encoder
1x I2C splitter expand module
1 x I2C Line,1 x power module Line,1 x PPM/SBUS Line
1x M8N GPS module
1x 433Mhz 100MW Radio Telemetry set
Package B included:
1 x 2.4.8 Pixhawk flight controller board with 4G SD with shell
1 x Safety switch
1 x Buzzer
1 x card reader
1x PPM encoder
1x I2C splitter expand module
1 x I2C Line,1 x power module Line,1 x PPM/SBUS Line
1x M8N GPS module
1x 915Mhz 100MW Radio Telemetry set